DTT-GB Glovebox Triple Thermal Evaporation
Desktop Sputter System
Vac Techniche Vacuum Coating Systems
The Vac Techniche glovebox triple thermal source desktop coater provides a very versatile thermal evaporation system for a vast range of source materials in various forms from wire, cord, pellets and powders, compatible with Boat/basket and coil source holders. Glovebox compatible, remote control, Motorised chamber lift mechanism.
Double magnetron target desk sputter coater can easily switch between evaporation and sputtering deposition for the preparation of multilayer coatings.
Read More
Three independent heat resistance thermal evaporation sources.
Option of source temperature control, Substate temperature monitoring and control options
Evaporation source holder designed causes no contamination from source materials on each other.
The length of the source holders can be adjusted in the range of 50mm~90mm.
Co-Evaporation upgrade available
Evaporation sources
boat
basket
coil/wire
Vacuum System consists of:
Heat resistant, Cylindrical Pyrex with 300 mm OD and 200 mm H.
90 L/s turbomolecular pump fitted directly to the vacuum envelop base plate and backed by a 6 m3/h two-stage rotary pump which introduces clean vacuum without the oil contamination that is normally present with an ordinary diffusion pump
Dry backing pump option is also available
The DTT triple evaporation source selection is ideal for deposition of multilayers or alloys.
The DTT, with integral turbo pumping reaches pressure quickly allowing the coating process to commence in a matter of minutes. It is ideal for research, laboratory and product applications
Touch Screen Control
For ease of use, remote connection via system Wi-Fi to laptop to emulate system the touch 7″ colour screen control with fully automatic control, data input, and display is designed for easy use for experienced and inexperienced operators.The control system allows upto 300 historical processed to be recorded.
Sample Holders
DCT-Desktop Carbon Coater/
The turbo-pumped carbon coater offers versatile sample stage configurations to accommodate various user needs. The sample stages are designed for easy rotation, adjustable height, and quick interchangeability. For uniform coating of porous specimens, you can opt for the rotary planetary sample stage as an additional feature.
DTT-GB EvaporationTurbomolecular Pump
90 L/s turbomolecular pump fitted directly to the vacuum envelop base plate and backed by a 6 m3/h two-stage rotary pump which introduces clean vacuum without the oil contamination that is normally present with an ordinary diffusion pump
Thermal EvaporationBoat/Basket/Coil
The desk thermal evaporator can be fitted with three independent heat resistance thermal evaporation sources. The good design of the evaporation source holder causes no contamination from source materials on each other. The length of the source holders can be adjusted in the range of 5cm~9cm.
DTT-GB Glovebox Triple Thermal EvaporationMore Details
Multi-layer thermal coatings
Large format chamber
High vacuum turbo pump 300 l/s
Diaphragm backing pump
Full range vacuum gauge
Evaporation source (boat / basket / coil) selection for multilayer thin film deposition
Co – evaporation to form alloy films
Quartz crystal monitoring system for real time thickness measurement (1 nm precision)
Manual mode, power, time control
Automatic Timed and Thickness deposition
Easy to use touch screen control panel
Rapid data input
User friendly
software that can be updated via network
Equipped with electronic shutter
Equipped with rotary sample holder
500 °C irradiative substrate heater
two-year warranty
Multi boats, baskets and coils installation
Ultimate Vacuum: Less than 2×10-6 torr
In board processor records and plots coating parameters graphs
USB port for exporting deposition process data
Automatic control of: power and coating independent of pressure
High current electrical feed through
DC power supply, 0-100amp high current,
Short circuit protection,
Utilities: 220V- 50HZ- 16A
Dimensions: 60 Cm H × 65 Cm W × 50 Cm D
Shipping weight: ~ 60 kg
Metal & dielectric Films
Thin film coating
Optical coatings
Nano & Microelectronic
Medical Components
Magnetic devices
Thin film Multi-layer devices
The DTT has the flowing options and accessories:
High current power supply
Quartz crystal
Spare glass
Evaporation sources (boat / basket / coil)
Thermal source materials
Mass Flow Controller
